SES-404 Long-Reach Broadband Switch
Key Features:
- Maximum transmission distance: Up to 21,000 feet over 26-AWG unshielded twisted pair.
- Maximum data rate: Up to 22.784 Mbits/s symmetric data rate.
- EFM (Ethernet in the First Mile) bonding up to 22.784 Mbits/s.
- Automatic load balancing and fail-over on bonded pairs for optimum throughput and redundancy.
- Hitless adds and drops allow new lines to be added to (or removed from) a bonded pairs without loss of service.
- Full range of management options including HTTP Web UI, local Console Port/Telnet CLI (Command Line Interface) and SNMP.
- QoS (Quality of Service) support with four traffic class priority queues.
- QoS determined by Port, IEEE 802.1p tagged frames, IPv4 or IPv6 priority fields.
- IEEE 802.1Q VLAN and Port-based VLAN support. Supports up to 64 802.1Q VLANs.
- Interfaces
LAN (Port 1-4): 4 x 10/100 Mbps, auto-sensing, auto MDI/MDIX, RJ-45 Ethernet ports
DSL (Loop/Pair 1-4): 2 x RJ-45 DSL connectors
- DSL (Digital Subscriber Line) interface
Each Loop/Pair Speed: 5.696 Mbps symmetric max
EFM bonded Speed: 22.784 Mbps symmetric max
Distance: Up to 21,000 ft (26AWG)
Line Technology: SHDSL.bis TCPAM
- Management
HTTP Web UI
Local Console Port/Telnet CLI
SNMPv2 Enterprise MIB
Firmware Upgrade Support
- Compliance
ITU G.shdsl
ITU G.shdsl.bis
ETSI SDSL
ETSI SDSL.bis
IEEE 802.3 EFM
IEEE 802.1Q VLAN
- Power
100-240VAC, 50/60Hz
- Dimensions
10.2 x 6 x 1.73 inches (261 x 151 x 44 mm)
- Weight
2.75lbs (1.25Kgs)